【英语词汇带翻译】汽车机械英语词汇翻译(11)
【shitiku.jxxyjl.com--专业英语词汇】
maximum autohrozed total mass 最大设计装载质量maximum design pay mass 最大允许装载质量
maximum autohorized pay mass 厂定最大总质量
manufacturer"s maxumum total mass 载重量
payload 车辆自重
kerb weight 总重量
gross weight 轴荷
axle load 最大设计轴荷
maximum design axle load 最小设计轴荷
minimum authorized axle load 最大允许轴荷
maximum design axle load 轮胎最大设计拖挂质量
maximum design tyre load 最大设计拖挂质量
maximum authorized tyre load 最大允许拖挂质量
maximum authorized towed mass 汽车列车最大设计质量
maximum design mass of vehicle combination 汽车列车最大允许质量
maximum authorized mass of vehicle combination 铰接车最大设计质量
maximum disgn mass of articulated vehicle 铰接车最大允许质量
maximum authorized amss of articulated vehicle 半挂牵引车承受的最大静载荷
maximum design static laod borne by semi-trailer towing vehicle 作用在挂接装置上的最大设计静载荷
maximum design static laod on coupling device 作用在挂接装置上的最大允许静载荷
maximum authorized static load on coupling device 比功率
power/mass ratio 比扭矩
torque/maximum total mass ratio 重量利用系数
factor of weight utilizaton 汽车型谱
chart of automotive model 后驱动汽车
rear drive automobile 前驱动汽车
front drive automobile 发动机后置式客车
bus with rear engine 四轮驱动车辆
all wheel drive automobile 发动机前置式客车
bus with front engine 发动机底置式客车
bus with underfloor engine 计算机辅助设计
computer aided deisgn(cad) 有限寿命设计
design for finite life 累积疲劳损伤原理
theory of cumulative damage in fatique 优化设计
optimum deisgn 汽车尺寸控制图
sketch on layout ofr dimenshion"s control of assembly 汽车总装配图
automobile assembly drawing 汽车总布置草图
sketch for automobile layout 汽车设计的技术经济分析
technical -economic analysis in automobile design 设计任务书
design assignment 系列化、通用化、标准化
seriation ,universalization and standardization 总布置设计
calculation for layout 运动校核
correction of motion 侧视轮廓
side outline 前视轮廓
end outline 顶视轮廓
plan outline 车长
vehicle length 车宽
vehicle width 车高
vehicle height 轴距
wheel base 轮距
track 前轮距
track front 后轮距
track rear 双胎间距
space between twin wheels 前悬
front overhang 后悬
rear overhang 离地间隙
ground clearance 纵向通过角
ramp angle 接近角
approach angle 离出角
departure angle 车架高度
height of chassis above ground 驾驶室后车架最大可用长度
maximum usable length of chassis behind cab 车身长度
body work length 车厢内部最大尺寸
maximum internal dimension of body 货厢内长
loading space length 货厢有效长度
loading length 货厢内宽
loading space width 货厢有效内宽
loading width 货厢内高
loading space height 货厢有效内高
loading height 货台高度
loading surface height 车架自由长度
frame free length 栏板内高
inside board hegiht 货厢容积
loading surface 门高
door height 门宽
door width 车架有效长度
chassis frame useful length 货厢全长
body length 牵引杆长
drawbar length 牵引装置的位置
position of towing attachment 牵引装置的悬伸
overhang of towing atachment 牵引装置的高度
heigth of towing attachment 牵引装置牵距
distance of towing attachment 牵引座前置距
fifth wheel lead 长度计算用牵引座前置距
fifth wheel lead for calculation of length 质量分配用牵引座前置距
fith wheel lead for calculation of mass distribution 牵引座结合面高度
height of coupling face 牵引装置至车辆前端的距离
distance between towing device and front end of towing vehicle 牵引叉销至车辆前端的距离
distance between jaw and front end of towing vehicle 半挂车间隙半径
rear tractor clearance radius of semi-trailer 半挂车前回转半径
front fitting radius of semi trailer 车轮垂直行程
vertical clearance of wheel 车轮提升高度
lift of wheel 转弯半径
turning circle 静止半径
static radius 碰撞
collision (crash,impact) 正碰撞
frontal collision (frontal impact) 侧碰撞
side collision (side impact) 后碰撞
rear collision (rear impact) 擦碰撞
sidewipe collision 碰撞方向
collision direction 碰撞角度
collision angle 倾斜的
oblique(tilt) 成角度的
angled 纵向的
longitudinal 垂直的
本文来源:https://shitiku.jxxyjl.com/zhuanyeyingyucihui/22742.html
-
人力资源专用英语词汇|阀门专用英语词汇(3)详细阅读
无阀振动泵 valveless vibration pump无负荷漏汽量 no-load steam loss无负荷漏汽率 rate of no-load steam loss吸(抽)气阀 aspirating valves吸入阀 suction valve吸入阀限位器 suction valve...
-
[机械常用英语词汇]机械物流术语英语词汇详细阅读
电子标签拣选系统 digital picking system rf拣选叉车拣选系统 optrf 物流集装单元器具 palletized unit implement 塔式推送拣选系统 wireless digital picking 通道式分拣系统 无线台车拣选系统 rf cart 登高式手推台车...
-
作物学专业英语词汇_铸造学专业英语词汇(24)详细阅读
碎砂机,松砂机 sand breaker碎铁 bushelling碎心锤 core buster碎心机 core breaker隧道炉 tunnel furnace隧道炉,隧道干燥炉 tunnel oven隧道炉,隧道干燥炉 tunnel stove隧道退火炉 tunnel annealing fu...
-
焊接专业英语词汇翻译_焊接专业英语词汇(3)详细阅读
焊接热循环 weld thermal cycle焊接温度场 field of weld temperature; weld temperature field准稳定温度场 quasi-stationary temperature field焊接热源 welding heat source点热源 po...
-
【作物学专业英语词汇】铸造学专业英语词汇(11)详细阅读
加热器具 heating apparatus加热器具 heating appliance加热时间 heating time加深框 upset加炭机 stoker加压处理器 autoclave加压冒口 pressure feeder加压模铸法 pressure die casting加重检验 incr...
-
工程英语词汇特征_工程英语词汇(M)详细阅读
macadam 碎石层〔道路〕 machine room 机房 magazine [site] 炸药仓〔地盘〕 magic eye 大门防盗眼 magma 岩浆 magmatic rock 岩浆岩 magnet core 磁心 magnetic crane 磁力起重机;磁力吊机 main anti-...
-
【焊接专业英语词汇翻译】焊接专业英语词汇(5)详细阅读
焊点 welding spot熔核 nugget熔核直径 diameter of nugget塑性金属环区corona bond焊透率penetration rate压痕indentation压痕深度depth of indentation压深率indentation ratio翘离sheet se...
-
电气专业英语词汇|电工专业英语词汇(J-M)详细阅读
jjaw 钳口jerk transducer(sensor) 加速度传感器 jet orifice separator 喷嘴分离器jet recorder 喷射式记录仪job 作业jordan sunshine recorder 暗筒日照计;乔唐日照计 journal 轴颈 journal axis...
-
【工程英语词汇特征】工程英语词汇(P1)详细阅读
package deal contract 统包合约 package development 组合发展;整体发展 package letting 把几个单位合为一组以一份合约出租 packer head 灌浆孔塞头 packer permeability test 压水试验;压水渗透试验 packe...
-
[照明术语和单位]照明术语(2)详细阅读
23 直接眩光(direct glare)视野内由于极高亮度或因光源遮蔽不足、或因高亮度反射所引起之眩光24 方向性照明(directional lighting)指于工作面或目标物上主要来自单一方向之照明25 减能眩光(disability glare)指减低视功能及明视度之眩光26 不舒服眩光(...