金属材料专业英语词汇_金属材料相关英语词汇(2)
【shitiku.jxxyjl.com--专业英语词汇】
base metal, application, jis & astm standard, and normal thickness
of galvanized steel sheet
锌镀层质量 zinc coating mass
表面处理 surface treatment
冷轧钢片 cold-rolled steel sheet/strip
热轧钢片 hot-rolled sheet/strip
电解冷轧钢片厚度公差
thickness tolerance of electrolytic cold-rolled sheet
热轧钢片厚度公差
thickness tolerance of hot-rolled sheet
冷轧或热轧钢片阔度公差
width tolerance of cold or hot-rolled sheet
长度公差 length tolerance
理论质量 theoretical mass
锌镀层质量(两个相同锌镀层厚度)
mass calculation of coating (for equal coating)/mm
锌镀层质量(两个不同锌镀层厚度)
mass calculation of coating (for differential coating)/mm
镀锡薄铁片(白铁皮/马口铁) (日工标准 jis g3303)
简介
general
镀锡薄铁片的构造
construction of electrolytic tinplate
镀锡薄钢片(白铁皮/马日铁)制造过程
production process of electrolytic tinplate
锡层质量
mass of tin coating (jis g3303-1987)
两面均等锡层
both side equally coated mass
两面不均等锡层
both side different thickness coated mass
级别、电镀方法、镀层质量及常用称号
grade, plating type, designation of coating mass & common coating
mass
镀层质量标记
markings & designations of differential coatings
硬度 hardness
单相轧压镀锡薄铁片(白铁皮/马口铁)
single-reduced tinplate
双相辗压镀锡薄钢片(马口铁/白铁皮)
dual-reduction tinplate
钢的种类 type of steel
表面处理 surface finish
常用尺寸 commonly used size
电器用硅 [硅] 钢片 electrical steel sheet
简介 general
软磁材料 soft magnetic material
滞后回线 narrow hystersis
矫顽磁力 coercive force
硬磁材料 hard magnetic material
最大能量积 maximum energy product
硅含量对电器用的低碳钢片的最大好处
the advantage of using silicon low carbon steel
晶粒取向(grain-oriented)及非晶粒取向(non-oriented)
grain oriented & non-oriented
电器用硅 [硅] 钢片的最终用途及规格
end usage and designations of electrical steel strip
电器用的硅 [硅] 钢片之分类
classification of silicon steel sheet for electrical use
电器用钢片的绝缘涂层
performance of surface insulation of electrical steel sheets
晶粒取向电器用硅钢片主要工业标准
international standard – grain-oriented electrical steel silicon
steel sheet for electrical use
晶粒取向电器用硅钢片 grain-oriented electrical steel
晶粒取向,定取向芯钢片及高硼定取向芯钢片之磁力性能及夹层系数(日工标准及美材标准)
magnetic properties and lamination factor of si-orient-core&
si-orient-core-hi b electrical steel strip (jis and aisi standard)
退火annealing
电器用钢片用家需自行应力退火原因
annealing of the electrical steel sheet
退火时注意事项 annealing precautionary
碳污染 prevent carbon contamination
热力应先从工件边缘透入
heat from the laminated stacks edges
提防过份氧化
no excessive oxidation
应力退火温度
stress –relieving annealing temperature
晶粒取向电器用硅 [硅] 钢片 – 高硼(hi-b)定取向芯钢片及定取向芯钢片之机械性能及夹层系数
mechanical properties and lamination factors of si-orient-core-hi-b
and si-orient-core grain orient electrical steel sheets
晶粒取向电器用硅 [硅] 钢;片 – 高硼低硫(ls)定取向 钢片之磁力及电力性能
magnetic and electrical properties of si-orient-core-hi-b-ls
晶粒取向电器用硅 [硅] 钢片 – 高硼低硫(ls) 定取向钢片之机械性能及夹层系数
mechanical properties and lamination factors of
si-orient-core-hi-b-ls
晶粒取向电器用硅(硅)钢片-高硼(hi-b)定取向 芯钢片,定取向芯钢片及高硼低硫(ls)定取向芯钢片之厚度及阔度公差
physical tolerance of si-orient-core-hi-b, si-orient-core, &
si-core-hi-b-ls grain
oriented electrical steel sheets
晶粒取向电器用硅(硅)钢片 – 高硼(hi-b)定取向 芯钢片,定取向芯钢片及高硼低硫(ls)定取向芯钢片之标准尺寸及包装
standard forms and size of si-orient-core-hi-b,si-core, &
si-orient-core-hi-b-ls grain-
oriented electrical steel sheets
绝缘表面 surface insulation
非晶粒取向电力用钢片的电力、磁力、机械性能 及夹层系数
lamination factors of electrical, magnetic & mechanical non-grain
oriented electrical
电器及家电外壳用镀层冷辘 [低碳] 钢片
coated (low carbon) steel sheets for casing,electricals & home
appliances
镀铝硅钢片 aluminized silicon alloy steel sheet
简介 general
镀铝硅合金钢片的特色
feature of aluminized silicon alloy steel sheet
用途
end usages
抗化学品能力
chemical resistance
镀铝(硅)钢片 – 日工标准(jis g3314)
hot-aluminum-coated sheets and coils to jis g 3314
镀铝(硅)钢片 – 美材试标准(astm a-463-77)35.7 jis g3314镀热浸铝片的机械性能
mechanical properties of jis g 3314 hot-dip aluminum-coated sheets
and coils
公差 size tolerance
镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较
comparsion of various resistance of aluminized steel & other kinds
of steel
镀铝(硅)钢片生产流程
aluminum steel sheet, production flow chart
焊接能力 weldability
镀铝钢片的焊接状态(比较冷辘钢片)
tips on welding of aluminized sheet in comparasion with cold rolled
steel strip
钢板
steel plate
钢板用途分类及各国钢板的工业标准包括日工标准及美材试标准
type of steel plate & related jis, astm and other major industrial
standards
钢板生产流程
production flow chart
钢板订货需知
ordering of steel plate
不锈钢
stainless steel
不锈钢的定义 definition of stainless steel
不锈钢之分类,耐腐蚀性及耐热性
classification, corrosion resistant & heat resistance of stainless
steel
铁铬系不锈钢片
chrome stainless steel
马氏体不锈钢
martensite stainless steel
低碳马氏体不锈钢
low carbon martensite stainless steel
含铁体不锈钢
ferrite stainless steel
镍铬系不锈钢
nickel chrome stainless steel
释出硬化不锈钢
precipitation hardening stainless steel
铁锰铝不锈钢
fe / mn / al / stainless steel
不锈钢的磁性
magnetic property & stainless steel
不锈钢箔、卷片、片及板之厚度分类
classification of foil, strip, sheet & plate by thickness
表面保护胶纸
surface protection film
不锈钢片材常用代号
designation of sus steel special use stainless
表面处理 surface finish
薄卷片及薄片(0.3至2.9mm厚之片)机械性能
mechanical properties of thin stainless steel(thickness from 0.3mm
to 2.9mm) – strip/sheet
不锈钢片机械性能(301, 304, 631, csp)
mechanical properties of spring use stainless steel
不锈钢 – 种类,工业标准,化学成份,特点及 主要用途
stainless steel – type, industrial standard, chemical composition,
characteristic & end usage of the most commonly used stainless steel
不锈钢薄片用途例
end usage of thinner gauge
不锈钢片、板用途例
examples of end usages of strip, sheet & plate
不锈钢应力退火卷片常用规格名词图解
general specification of tension annealed stainless steel strips
耐热不锈钢
heat-resistance stainless steel
镍铬系耐热不锈钢特性、化学成份、及操作温度
heat-resistance stainless steel
铬系耐热钢
chrome heat resistance steel
镍铬耐热钢
ni - cr heat resistance steel
超耐热钢
special heat resistance steel
抗热超级合金
heat resistance super alloy
耐热不锈钢比重表
specific gravity of heat – resistance steel plates and sheets
stainless steel
不锈钢材及耐热钢材标准对照表
stainless and heat-resisting steels
发条片 power spring strip
发条的分类及材料
power spring strip classification and materials
上链发条 wind-up spring
倒后擦发条 pull back power spring
圆面("卜竹")发条 convex spring strip
拉尺发条 measure tape
魔术手环 magic tape
魔术手环尺寸图drawing of magic tap
定型发条 constant torque spring
定型发条及上炼发条的驱动力
spring force of constant torque spring and wing-up spring
定型发条的形状及翻动过程
shape and spring back of constant torque spring
定型发条驱动力公式及代号
the formula and symbol of constant torque spring
边缘处理 edge finish
硬度 hardness
高碳钢化学成份及用途
high carbon tool steel, chemical composition and usage
每公斤发条的长度简易公式
the length of 1 kg of spring steel strip
sk-5 & aisi-301 每公斤长的重量/公斤(阔100-200公厘) weight per one meter long
(kg) (width 100-200mm)
sk-5 & aisi-301 每公斤之长度(阔100-200公厘) length per one kg (width
100-200mm)
sk-5 & aisi-301 每公尺长的重量/公斤(阔2.0-10公厘)
weight per one meter long (kg) (width 2.0-10mm)
sk-5 & aisi-301 每公斤之长度(阔2.0-10公厘)
length per one kg (width 2.0-10mm)
高碳钢片 high carbon steel strip
分类
classification
用组织结构分类
classification according to grain structure
用含碳量分类 – 即低碳钢、中碳钢及高碳钢
classification according to carbon contains
本文来源:https://shitiku.jxxyjl.com/zhuanyeyingyucihui/10832.html
-
人力资源专用英语词汇|阀门专用英语词汇(3)详细阅读
无阀振动泵 valveless vibration pump无负荷漏汽量 no-load steam loss无负荷漏汽率 rate of no-load steam loss吸(抽)气阀 aspirating valves吸入阀 suction valve吸入阀限位器 suction valve...
-
[机械常用英语词汇]机械物流术语英语词汇详细阅读
电子标签拣选系统 digital picking system rf拣选叉车拣选系统 optrf 物流集装单元器具 palletized unit implement 塔式推送拣选系统 wireless digital picking 通道式分拣系统 无线台车拣选系统 rf cart 登高式手推台车...
-
作物学专业英语词汇_铸造学专业英语词汇(24)详细阅读
碎砂机,松砂机 sand breaker碎铁 bushelling碎心锤 core buster碎心机 core breaker隧道炉 tunnel furnace隧道炉,隧道干燥炉 tunnel oven隧道炉,隧道干燥炉 tunnel stove隧道退火炉 tunnel annealing fu...
-
焊接专业英语词汇翻译_焊接专业英语词汇(3)详细阅读
焊接热循环 weld thermal cycle焊接温度场 field of weld temperature; weld temperature field准稳定温度场 quasi-stationary temperature field焊接热源 welding heat source点热源 po...
-
【作物学专业英语词汇】铸造学专业英语词汇(11)详细阅读
加热器具 heating apparatus加热器具 heating appliance加热时间 heating time加深框 upset加炭机 stoker加压处理器 autoclave加压冒口 pressure feeder加压模铸法 pressure die casting加重检验 incr...
-
工程英语词汇特征_工程英语词汇(M)详细阅读
macadam 碎石层〔道路〕 machine room 机房 magazine [site] 炸药仓〔地盘〕 magic eye 大门防盗眼 magma 岩浆 magmatic rock 岩浆岩 magnet core 磁心 magnetic crane 磁力起重机;磁力吊机 main anti-...
-
【焊接专业英语词汇翻译】焊接专业英语词汇(5)详细阅读
焊点 welding spot熔核 nugget熔核直径 diameter of nugget塑性金属环区corona bond焊透率penetration rate压痕indentation压痕深度depth of indentation压深率indentation ratio翘离sheet se...
-
电气专业英语词汇|电工专业英语词汇(J-M)详细阅读
jjaw 钳口jerk transducer(sensor) 加速度传感器 jet orifice separator 喷嘴分离器jet recorder 喷射式记录仪job 作业jordan sunshine recorder 暗筒日照计;乔唐日照计 journal 轴颈 journal axis...
-
【工程英语词汇特征】工程英语词汇(P1)详细阅读
package deal contract 统包合约 package development 组合发展;整体发展 package letting 把几个单位合为一组以一份合约出租 packer head 灌浆孔塞头 packer permeability test 压水试验;压水渗透试验 packe...
-
[照明术语和单位]照明术语(2)详细阅读
23 直接眩光(direct glare)视野内由于极高亮度或因光源遮蔽不足、或因高亮度反射所引起之眩光24 方向性照明(directional lighting)指于工作面或目标物上主要来自单一方向之照明25 减能眩光(disability glare)指减低视功能及明视度之眩光26 不舒服眩光(...