ciscoccna认证教程_CISCOCCNA认证考试640-810题库原题2

【shitiku.jxxyjl.com--思科试题】

three bicycle stores in the testking pro chain have decided to establish network connectivity to maintain their repair business in a centralized manner. the stores contracted a local technician, non-cisco  certified, to configure the routers. however, the local mcp certified technician was not able to finish the configuration in an appropriate manner. no network connectivity has been established among the  routers. the routers are named testking1, testking2, and testking3.  
testking pro has contracted you to fix the problems. identify the fault(s) and make the necessary  change(s) to establish connectivity. the routers have been configured with the following specifications:  
?the routers are named testking1, testking2, and testking3.  
?rip is the routing protocol  
?clocking is provided on the serial 0 interfaces  
?the password on each router is "testking"  
?the subnet mask on all interfaces is the default mask.  
?the ip addresses are listed in chart below.   
testking1  
e0 192.168.27.1  
e1 192.168.29.1  
s0 192.168.31.1  
secret password: testking  
testking2  
e0 192.168.35.1  
s0 192.168.33.1  
s1 192.168.31.2  
secret password: testking  
testking3  
e0 192.168.37.1  
s1 192.168.33.2  
secret password: testking  

to configure the router click on the host icon that is connected to the router by a serial cable.  
answer:  
click on host 2:  
router testking1:  
testking1> enable  
password: testking  
testking1 # config terminal  
testking1 (config) # interface ethernet 0  
testking1 (config-if) # ip address 192.168.27.1 255.255.255.0  
testking1 (config-if) # no shutdown  
testking1 (config-if) # exit  
testking1 (config) # interface ethernet 1  
testking1 (config-if) # ip address 192.168.29.1 255.255.255.0  
testking1 (config-if) # no shutdown  
testking1 (config-if) # exit  
testking1 (config) # interface serial 0  
testking1 (config-if) # ip address 192.168.31.1 255.255.255.0  
testking3 (config-if) # clock rate 64000  
testking1 (config-if) # no shutdown  
testking1 (config-if) # exit  
testking1 (config) # router rip  
testking1 (config-router) # network 192.168.27.0  
testking1 (config-router) # network 192.168.29.0  
testking1 (config-router) # network 192.168-31.0  
testking1 (config-router) # ctrl-z  
testking1 # copy running-config startup-config  
click on host 4

本文来源：https://shitiku.jxxyjl.com/sikeshiti/50529.html